IBM Flex System p270 Compute Node Installation And Service Manual page 216

BA130011 • BA130014
BA130011
Explanation: USB CD-ROM in the media tray: execution of ATA/ATAPI command was not completed with the
allowed time.
Response:
1. Retry the operation.
2. Reboot the server.
3. Troubleshoot the media tray and CD-ROM drive.
4. Replace the USB CD or DVD drive.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA130012
Explanation: USB CD-ROM in the media tray: execution of ATA/ATAPI command failed.
Response:
1. Retry the operation.
2. Reboot the server.
3. Troubleshoot the media tray and CD-ROM drive.
4. Replace the USB CD or DVD drive.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA130013
Explanation: USB CD-ROM in the media tray: bootable media is missing from the drive
Response:
1. Insert a bootable CD in the drive and retry the operation.
2. Retry the operation.
3. Reboot the server.
4. Troubleshoot the media tray and CD-ROM drive.
5. Replace the USB CD or DVD drive.
6. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA130014
Explanation: USB CD-ROM in the media tray: the media in the USB CD-ROM drive has been changed.
Response:
1. Retry the operation.
2. Reboot the server.
3. Troubleshoot the media tray and CD-ROM drive.
4. Replace the USB CD or DVD drive.
5. Reboot the server.
6. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
204
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide