IBM Flex System p270 Compute Node Installation And Service Manual page 135

632CC301 • 632CC400
632CC301
Explanation: Virtual optical device error. Media or device error occurred.
Service action / serviceable event: No
Called home automatically: No
Problem determination: Refer to the hosting partition for problem analysis.
632CC302
Explanation: Virtual optical device error. Media or device error occurred.
Service action / serviceable event: No
Called home automatically: No
Problem determination: Refer to the hosting partition for problem analysis.
632CC303
Explanation: Virtual optical device, media has an unknown format.
Service action / serviceable event: No
Called home automatically: No
Response: No corrective action is required. If the problem persists refer to the hosting partition for problem
analysis.
632CC333
Explanation: Virtual optical device error. Incompatible media.
Service action / serviceable event: No
Called home automatically: No
Problem determination:
1. Verify that the disk has a supported format.
2. If the format is supported, clean the disk and attempt the failing operation again.
3. If the operation fails again with the same system reference code, ask your media source for a replacement disk.
632CC400
Explanation: Virtual optical device error. Physical link error detected by device.
Service action / serviceable event: No
Called home automatically: No
Problem determination: Refer to the hosting partition for problem analysis.
123
Chapter 8. Troubleshooting