IBM Flex System p270 Compute Node Installation And Service Manual page 212

BA090002 • BA09000B
BA090002
Explanation: SCSD DASD: test unit ready failed; sense data available
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA090003
Explanation: SCSD DASD: send diagnostic failed; sense data available
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA090004
Explanation: SCSD DASD: send diagnostic failed: devofl cmd
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA09000A
Explanation: There was a vendor specification error.
Response:
1. Check the vendor specification for additional information.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA09000B
Explanation: Generic SCSD sense error
Response:
1. Verify that the SCSD cables and devices are properly plugged.
2. Correct any problems that are found.
3. Reboot the server.
4. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
200
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide