IBM Flex System p270 Compute Node Installation And Service Manual page 176

B7001150 • B7001732
B7001150
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7001151
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7001152
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7001160
Explanation: Service processor failure
Response:
1. Go to Isolating firmware problems.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
B7001161
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7001730
Explanation: The VPD for the system is not what was expected at startup.
Response: Replace the management card, as described in Removing the management card and Installing the
management card.
B7001731
Explanation: The VPD on a memory DIMM is not correct and the memory on the DIMM cannot be used, resulting
in reduced memory.
Response: Replace the MEMDIMM symbolic CRU, as described in Service processor problems.
B7001732
Explanation: The VPD on a processor card is not correct and the processor card cannot be used, resulting in
reduced processing power.
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
164
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide