IBM Flex System p270 Compute Node Installation And Service Manual page 204

BA01D030 • BA01D052
BA01D030
Explanation: DHCP failed to write to the network
Response:
1. Verify that the network cable is connected, and that the network is active.
2. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA01D040
Explanation: The DHCP discover server timed out
Response:
1. Verify that the DHCP server has addresses available.
2. Verify that the DHCP server configuration file is not overly constrained. An over-constrained file might prevent a
server from meeting the configuration requested by the client.
3. Perform the following actions that checkpoint CA00E174 describes:
a. Verify that:
v The bootp server is correctly configured; then retry the operation.
v The network connections are correct; then retry the operation.
b. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to
determine the recommended actions. If a firmware update is needed, see Updating the firmware
BA01D050
Explanation: DHCP::discover no good offer
Response: DHCP discovery did not receive any DHCP offers from the servers that meet the client requirements.
Verify that the DHCP server configuration file is not overly constrained. An over-constrained file might prevent a
server from meeting the configuration requested by the client.
BA01D051
Explanation: DHCP::discover DHCP request timed out
Response: DHCP discovery did receive a DHCP offer from a server that met the client requirements, but the server
did not send the DHCP acknowledgement (DHCP ack) to the client DHCP request.
Another client might have used the address that was served.
Verify that the DHCP server has addresses available.
BA01D052
Explanation: DHCP::discover: 10 incapable servers were found
Response: Ten DHCP servers have sent DHCP offers, none of which met the requirements of the client. Check the
compatibility of the configuration that the client is requesting and the server DHCP configuration files.
192
Power Systems: IBM Flex System p270 Compute Node Installation and Service Guide