Appendix; Configuring A Catalyst 4500 Series Switch For Network Assistant Management; Network Assistant-Related Features And Their Defaults - Cisco Network Assistant Getting Started Manual

Configuring a Catalyst 4500 Series Switch for
Network Assistant Management
This appendix describes how to configure a Catalyst 4500 series switch for Network Assistant. It also
lists the Network Assistant feature defaults for the switch.
For complete information on configuring Network Assistant on the Catalyst 4500 series switch, see the
Note
"Configuring the Catalyst 4500 Series Switch with Cisco Network Assistant" chapter in the
Catalyst 4500 Series Switch Cisco IOS Software Configuration
Note For complete syntax and usage information for the switch commands used in this chapter, see the
Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at this location:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/index.htm.
This appendix contains these topics:
•
•

Network Assistant-Related Features and Their Defaults

Table A-1
Table A-1
Feature
Authentication
IP address
IP HTTP port number
IP HTTPS port number
IP HTTP server
Cluster run
OL-6194-07
Network Assistant-Related Features and Their Defaults, page A-1
Configuring Your Switch for Network Assistant, page A-2
lists the Network Assistant-related configuration parameters on a Catalyst 4500 series switch.
Network Assistant-Related Configuration on a Catalyst 4500 Series Switch
A P P E N D I X
Default Value Recommended Value
Disabled Optional
Depends on User selectable
community or
1
discovery option
80 Optional
443 Optional
Disabled Enabled
Disabled Enabled
Getting Started with Cisco Network Assistant
A
Guide.
2
3
4
5
A-1