Bus Voltage (Obj. 2B0Fh)]; [Bus Voltage (Obj. 2B0Fh: 00H)]; Load-Side Cumulative Feedback Pulses (Obj. 2B10H)]; [Load-Side Cumulative Feedback Pulses (Obj. 2B10H: 00H)] - Mitsubishi Electric MR-J5-G-N1 User Manual

8.13

[Bus voltage (Obj. 2B0Fh)]

[Bus voltage (Obj. 2B0Fh: 00h)]

Data Type Access
U16 RO
Supported firmware version

ECT

A5
Description
The bus voltage is returned.
8.14
[Load-side cumulative feedback pulses (Obj.
2B10h)]

[Load-side cumulative feedback pulses (Obj. 2B10h: 00h)]

Data Type Access
I32 RO
Supported firmware version

ECT

A5
Description
The cumulative feedback pulses from the load-side encoder are returned.
The returned value is limited within the range from C4653601h (-999999999) to 3B9AC9FFh (999999999). If the value
exceeds the upper or lower limit value, it changes to "00000000h".
8.15

[Load-side droop pulses (Obj. 2B11h)]

[Load-side droop pulses (Obj. 2B11h: 00h)]

Data Type Access
I32 RO
Supported firmware version

ECT

A5
Description
The load-side droop pulses (load-side encoder pulse unit) are returned.
8 Monitor Objects
88
8.13 [Bus voltage (Obj. 2B0Fh)]
Mapping Default

TxPDO
 
 
Mapping Default

TxPDO
 
 
Mapping Default

TxPDO
 
 
Range Units
0000h to FFFFh V
 
 
Range Units
80000000h to pulse
7FFFFFFFh
 
 
Range Units
80000000h to pulse
7FFFFFFFh
 
 
Save Parameter

Impossible
 
 
Save Parameter

Impossible
 
 
Save Parameter

Impossible
 
 