[Auxiliary (Obj. 2801H: 06H)]; [M Code (Obj. 2801H: 07H)] - Mitsubishi Electric MR-J5-G-N1 User Manual

[Auxiliary (Obj. 2801h: 06h)]

Data Type Access
I32 RW
Supported firmware version

ECT
B8 
Description
Set the auxiliary function of the point table.
Setting "1" or "3" for the last point table triggers an alarm.
• Absolute position command method
0: Execute the automatic operation of one selected point table.
1: Execute the automatic continuous operation without stopping the next point table.
8: Execute the automatic continuous operation without stopping the point table selected at startup.
9: Execute the automatic continuous operation without stopping the point table No.1.
• Relative position command method
2: Execute the automatic operation of one selected point table.
3: Execute the automatic continuous operation without stopping the next point table.
10: Execute the automatic continuous operation without stopping the point table selected at startup.
11: Execute the automatic continuous operation without stopping the point table No.1.

[M code (Obj. 2801h: 07h)]

Data Type Access
I32 RW
Supported firmware version
ECT 

B8
Description
Set the code to be outputted when the positioning operation is completed.
Mapping Default
Impossible 0
 
 
Mapping Default
Impossible 0
 
 
Range Units
0 to 3, 8 to 11 
 
 
Range Units

0 to 255
 
 
16.1 [Point table 001 (Obj. 2801h)]
Save Parameter
Possible Point table
 
 
Save Parameter
Possible Point table
 
 
16 Point table Mode Objects
16
187