Restore Default Parameters (Obj. 1011H)]; [Restore Default Parameters (Obj. 1011H: 00H)]; [Restore All Default Parameters (Obj. 1011H: 01H)] - Mitsubishi Electric MR-J5-G-N1 User Manual

3.7

[Restore default parameters (Obj. 1011h)]

[Restore default parameters (Obj. 1011h: 00h)]

Data Type Access
U8 RO
Supported firmware version

ECT
A5 
Description
The total number of Sub Indexes is returned.
Default Range
01h 01h (fixed)

[Restore all default parameters (Obj. 1011h: 01h)]

Data Type Access
U32 RW
Supported firmware version
ECT 

A5
Description
All parameters (servo parameters, network parameters, and point table data) that can be stored in the non-volatile memory
can be reset to the factory setting. To reset the servo parameters and network parameters to the factory setting, write
"64616F6Ch" (= reverse order of ASCII code of "load") in this object, and cycle the power or reset the software.
When a multi-axis servo amplifier is used, the servo parameters of all axes are initialized.
The read value is always "00000001h" (initializing values).
Mapping Default

Impossible
 
 
Description
Sub Index 1 is supported.
Mapping Default
Impossible 00000001h
 
 
Range Units
 
 
 
Range Units

00000000h to
FFFFFFFFh
 
 
3.7 [Restore default parameters (Obj. 1011h)]
Save Parameter

Impossible
 
 
Save Parameter

Impossible
 
 
3 General Objects
3
39