[Drive Recorder History Power On Time (Obj. 2A70H: 03H)]; [Drive Recorder History Time (Second) (Obj. 2A70H: 04H)]; [Drive Recorder History Time (Nanosecond) (Obj. 2A70H: 05H)] - Mitsubishi Electric MR-J5-G-N1 User Manual

[Drive recorder history power on time (Obj. 2A70h: 03h)]

Data Type Access
U32 RO
Supported firmware version

ECT
A5 
Description
Returns the power-on cumulative time when data was recorded using the drive recorder. When there is no history,
"00000000h" is returned.

[Drive recorder history time (second) (Obj. 2A70h: 04h)]

Data Type Access
U32 RO
Supported firmware version

ECT
A5 
Description
The time at when recorded data in the drive recorder is returned as a 32-bit integer (time passed from January 1, 1970,
0:00:00.000000000).
If time data cannot be obtained from the network, alarm occurrence time shows the cumulative power-on time from January 1,
1970, 0:00:00.000000000.
Use this object together with [Drive recorder history time (nanosecond) (Obj. 2A70h: 05h)] according to the system.

[Drive recorder history time (nanosecond) (Obj. 2A70h: 05h)]

Data Type Access
U32 RO
Supported firmware version

ECT
A5 
Description
Returns the digits after the ones indicating seconds in the recording time of the drive recorder as a 32-bit integer. A value is
returned in units of nanoseconds, but only the values in milliseconds increase.
For example, if an alarm occurs on January 1, 2000, 12:00:00.001, "000F4240h (1000000)" will be returned.
Mapping Default
Impossible 00000000h
 
 
Mapping Default
Impossible 00000000h
 
 
Mapping Default
Impossible 00000000h
 
 
Range Units
00000000h to 
FFFFFFFFh
 
 
Range Units

00000000h to
FFFFFFFFh
 
 
Range Units

00000000h to
FFFFFFFFh
 
 
7.10 [Drive recorder history newest (Obj. 2A70h)]
Save Parameter
Impossible 
 
 
Save Parameter

Impossible
 
 
Save Parameter

Impossible
 
 
7 Alarm Objects
7
81