Installing The Gear Position Sensor; Installing The Suction Pump - Husqvarna FS 450 2019 Repair Manual

17 .5.19

Installing the gear position sensor

17.5.20

Installing the suction pump

-
Position the gear position sensor.
-
Mount and tighten screws
Guideline
Screw, gear
position sensor
-
Oil the internal rotor and external rotor before mounting.
-
Insert 0-ring
8.
-
Position pin
-
Mount internal rotor@) and external rotor
✓ The rounded sides of the external rotor face the engine
case.
D04904-11
Position the oil pump cover
screws (D.
Guideline
Screw, suction
pump cover
O.
M5 5 Nm (3. 7 lbf ft)
O.
0.
Mount and tighten
M5 6 Nm (4.4 lbf ft)
ENGINE 17
..
Loctite ® 243
™
8.
..
Loctite ® 243
™
235