Installing The Suction Pump - Husqvarna FC 250 2018 Repair Manual

17 ENGINE
17.5.12
230

Installing the suction pump

Position the oil pump cover.
f)
✓ Marking faces upward.
Mount and tighten screws
Guideline
Screw, oil pump M5
cover
0 .
Insert pin
Position oil pump gear wheel 0).
Mount washer @.
@).
Mount lock ring
Crank the oil pump gear wheel and ensure that it can move
easily.
Mount oil pump idler gear
Mount washers G!).
«8 .
Mount lock ring
O .
Insert needle roller
8.
Position suction pump
✓ The rounded sides of the external rotor face the engine
case.
-
Crank the oil pump gear wheel and ensure that it can move
easily.
8 .
6 Nm (4.4 lbf ft)
Loctite ® 243
@)
with the washer.
™