Installing The Water Pump Cover; Installing The Gear Position Sensor; Installing The Suction Pump - Husqvarna FS 450 2017 Repair Manual

17 ENGINE
17.5.18
17.5.19
17.5.20
232

Installing the water pump cover

Installing the gear position sensor

Installing the suction pump

-
Put the water pump cover seal in place.
-
Mount the water pump cover.
O
-
Mount screw with the sealing washer but do not tighten
yet.
Guideline
Screw, water pump
cover
-
Mount screw @} but do not tighten yet.
Guideline
Screw, water M6x25
pump cover
CD
-
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
Screw, water pump
cover
-
Position the gear position sensor.
-
Mount and tighten screws
Guideline
Screw, gear M5
position sensor
-
Oil the internal rotor and external rotor before mounting.
O.
-
Insert 0-ring
8
Position pin into the oil pump shaft from above.
CD.
Position pin
M6x25 10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite
M6x55 10 Nm (7.4 lbf ft)
O.
5 Nm (3.7 lbf ft)
Loctite
®
243 ™
..
..
®
243 ™