Ricoh MP C6502SP Field Service Manual page 189

3. Open the front door and remove the shipping retainers.
4. Remove the brackets, tags, and wires in this order: [A]> [B]> [C] ( x 2 each).
5. Be sure to remove the two sheets of paper [D].
6. Install the ground plate [A]. ( x 2; M3 x 6)
Set the ground plate so that there is no gap between the plate and the bottom frame of the finisher
(as shown).
7. Install the table extension [B]. ( x 2; M4 x 8)
The edge of the table extension should be aligned with the edge of the finisher.
8. Attach the cushion [C] to the right side of the upper cover.
9. Install the entrance guide plate [D]. ( x 2; M3 x 6)
Finisher SR4110 (D707)
187