Sling Handles Folded Properly - IBM System Storage TS3310 Setup And Operator Manual

Figure 3-20. Sling handles folded properly
3. Slide the module partially onto the rail shelves in the rack.
4. Continue to support the library module from the front while you remove the
5. Push the module into the rack until it contacts the flange on the rear of each
6. Install and tighten the rear thumb screws ( 1 in Figure 3-21 on page 3-23)
3-22
TS3310 Tape Library Setup and Operator Guide
sling.
rack mount rail.
located on the flange on the rear of each rack mount rail.