Optional Features; Optional Features; Ultrium 3 Tape Drives; Scsi Ultrium 3 Tape Drives In The Library - IBM System Storage TS3310 Setup And Operator Manual

reads each cartridge bar code label and the fiducial labels that identify the types of
cartridge magazines and tape drives installed in the library.

Optional Features

The table below lists additional features that can be added to the library to
enhance performance.
For information on ordering additional features or replacement parts for your
library, see Chapter 13, "Parts List," on page 13-1.

Ultrium 3 Tape Drives

This library supports the Ultrium 3 Tape Drive. Each tape drive in the library is
packaged in a container called a drive sled. The drive is a customer replaceable
unit (CRU), and is designed for quick removal and replacement in the library.
The IBM Ultrium 3 Tape Drive supports LVD Ultra160 or Fibre Channel interfaces.
It features two HD68 connectors or one LC Fibre Channel connector.
Figure 1-5. SCSI Ultrium 3 Tape Drives in the library control module
Note: LTO-3 SCSI and Fibre Channel drives are not allowed in the same logical
1-8
TS3310 Tape Library Setup and Operator Guide
Table 1-2. Optional features
Type of Feature
Ultrium 3 Tape Drives
Power Supply
Feature Licenses
Library and Drive Code
Update
Rack Mount Kit
Rack PDU Line Cord
library.
Description
SCSI
4 Gb Fibre Channel
Redundant
Capacity Expansion
Path Failover
Library and drive code
update by an IBM Service
Representative
Hardware required to mount
your library in a rack
Feature Code
8037
8042
1900
1640
1682
0500
7003
9848
1