Step 12: Register For My Support - IBM System Storage TS3310 Setup And Operator Manual

2. Using the right and left arrows near the top of the screen, scroll between logical
3. Load the I/O Station with data cartridges.
4. Choose the logical library to which these cartridges are to be assigned.
5. Select Operations → Insert Media.
6. Repeat this procedure until all data cartridges have been imported into the

Step 12: Register for My Support

My Support registration provides email notification from IBM when new firmware
levels have been updated and are available for download and installation as well
as other information about your library.
To register for My Support:
v Visit the web at https://www-1.ibm.com/support/mysupport/us/en/.
v Enter your user name and password on the Appendix D, "Library Configuration
IBM recommends that you update library and drive firmware when new levels
become available.
v For instruction on updating library and drive firmware, see "Updating Library
Now you are ready to use your library.
libraries and make note of the number of storage slots assigned to each logical
library.
library.
Form," on page D-1.
Firmware" on page 8-12 and "Updating Drive Firmware" on page 8-13.
Chapter 7. Configuring the Library
7-7