User Privileges - IBM System Storage TS3310 Setup And Operator Manual

|
|
|
|

User Privileges

|
Table 6-1. Menus available from the Web User Interface (continued)
SNMP
SNMP Traps
Network
Save/Restore Configuration
─ Manage Access
Users
Set Session Timeout
LDAP
─ Service Library
Operator Interventions
Capture Library Log
Capture Drive Log
View/Update Library Firmware Levels
View/Update Drive Firmware Levels
Shutdown/Restart Library
User privilege levels are manually assigned to user accounts created within the
library. Controlling access to screens and operations within the library preserves
the integrity of the library and the data that is stored within the library.
There are two types of user privileges in the library.
v Administrative users are allowed access to the entire physical library and all of
its logical libraries. One and only one administrator user must be assigned the
login name admin.
v Users are allowed to operate a logical library, but not perform actions that affect
the physical library.
User privileges include:
v A screen saver is invoked after 10 minutes of inactivity on the Operator Panel.
The Web User Interface (UI) does not use a screen saver. The User,
Administrative user, or Service user who is inactive between 10 and 30 minutes
returns to the last accessed screen when activating the screen again.
v Any logged in User, Administrative user, or Service user who is inactive for
more than 30 minutes is logged out.
v Up to 18 Users and/or one Administrative user can be logged in at one time on
the Web UI. Only one user (Administrative or Service) can be logged in at one
time on the Operator Panel. One Administrative user can disconnect another
Administrative user.
v Any user can be logged in to only one interface at a time.
v When a Service user logs in, all other Users and Administrative users are logged
out and notified that they cannot perform actions on the library. A message is
posted that Service is logged in and no other users can access the library until
after Service has logged out.
Chapter 6. User Interfaces
6-9