Transferring The Top Cover From The Control; Picker Locking Mechanism - IBM System Storage TS3310 Setup And Operator Manual

Transferring the Top Cover from the Control Module to an
|
Expansion Module
|
|
|
|
|
|
|
|
|
Figure 3-10. Picker locking mechanism
|
|
|
Each library comes with a top cover that is shipped with the Control Module. If
you are installing an Expansion Module as the top module in a library, you must
move the top cover from the Control Module to the top Expansion Module.
1. Engage the picker assembly lock mechanism ( 1 in Figure 3-10).
2. Remove the 4 - #2 Phillips top cover screws ( 1 in Figure 3-11 on page 3-12).
1
Chapter 3. Installing A New Library in a Rack
3-11