IBM System Storage TS3310 Setup And Operator Manual page 301

1) Informational . . . . . . . . . . . . . . . YES
2) Statistic . . . . . . . . . . . . . . . . . . . NO
c. Reference code selection
1) Option . . . . . . . . . . . . . . . . . . . 1
2) Reference codes. . . . . . . . . . . . . *ALL
d. Device selection
1) Option . . . . . . . . . . . . . . . . . . . 1
2) Device type or resource names . . *ALL
7. On the "Log Analysis Report" screen, enter a 5 on an error line that has a
resource type of 3583 (library) or 3580 (drive), and press [Enter].
8. On the "Display Detail Report for Resource" screen, press:
v F4=Additional Information.
Pressing F4 will display the machine type and serial number of the device. It
also will display SCSI sense data, if available.
v F6=Hexadecimal report.
Pressing F6 will display the device hexadecimal data (for support use).
v F9=Address Information.
Pressing F9 will display the SCSI address information.
Appendix A. Message Retrieval at the Host
A-7