Picker Assembly Lock Mechanism - IBM System Storage TS3310 Setup And Operator Manual

Figure 3-22. Picker assembly lock mechanism
3-24
TS3310 Tape Library Setup and Operator Guide
1
2. IMPORTANT: Ensure that the front and rear gear racks are locked in the
upper position (see 2 in Figure 3-19 on page 3-21).
3. Ensure that the module-to-module alignment pin ( 1 in Figure 3-23 on page
3-25) is in the raised position. If necessary, raise the pin and rotate it half a
turn to lock it in the raised position.