Working With User Accounts; Creating User Accounts - IBM System Storage TS3310 Setup And Operator Manual

disruption of library operations. Administrative users must manually change the
logical library mode to online or offline from the Operator Panel or the Web User
Interface (UI).
Details on changing logical library modes include:
v The default logical library mode is online.
v When you access these screens, only logical libraries accessible by the user
When you are changing logical library mode, be aware of the following
information:
v The Online/Offline button toggles between states.
v If a logical library is in use, the Online/Office button is grayed out.
v Set the button to read Online to take either the physical library or a logical
v Set the button to read Offline to take either the physical library or a logical

Working with User Accounts

There are two types of user accounts: user and administrative user.
v User - has access to one or more assigned logical libraries and can perform
v Administrative user - has access to the entire physical library and all of its
One administrative user account, Admin, is configured by default and can be
modified at any time, but not deleted. An administrative user can perform all user
account functions; a user cannot perform any administrative account functions.
Refer to "User Privileges" on page 6-9 for more information on library permission
levels.

Creating User Accounts

Administrative users can create user accounts any time after the initial
configuration. Users cannot create user accounts. A maximum of 300 user accounts
can be created in the physical library.
Note: User account user names are limited to 1-12 alphanumeric characters, and
To create user accounts, you need to provide information for the following fields:
v User Name is the login name of the user account you are creating.
v Password is a unique string of alphanumeric characters for the user account you
v Privilege level is set to either User or Admin. Refer to "User Privileges" on page
5-6
TS3310 Tape Library Setup and Operator Guide
appear.
library, depending on the current view, to an online state, which is the normal
operating condition. In this mode, the robotics are enabled and all host
commands are processed.
library, depending on the current view, to an offline state. If only the physical
library is taken offline, logical libraries will not process robotics commands, even
though they are online. If only a logical library is taken offline, neither the
physical library nor the other logical libraries are affected.
functions within a logical library, such as performing media and drive functions.
A user cannot perform actions that affect the physical library, such as creating,
modifying, or deleting a logical library.
logical libraries.
passwords are limited to 6-12 alphanumeric characters.
are creating.
6-9 for more information on user privilege levels.