Keyboards; Login Screen; Operator Panel Login Screen - IBM System Storage TS3310 Setup And Operator Manual

Keyboards

Login Screen

Figure 6-2. Operator Panel Login screen
|
|
|
|
|
|
When a user touches a text box requiring data entry, a keyboard screen appears.
Either the alphabetic or numeric keyboard appears, depending on the type of input
field. All alphabetic character entries are lower case. The text box appears at the
top of the screen and the number/characters appear as they are entered. The 123
button opens the numeric keyboard from alphabetic keyboard, The abc button
opens the alphabetic keyboard from the numeric keyboard. The back arrow erases
one character at a time.
Attention: To use the touchscreen effectively, tap lightly to make your selections.
To fill in the User name, lightly touch the blank field to display the alphabetic and
numeric touch pads then, use the touch keys to spell out the user ID and touch
OK. Similarly, enter the Password and touch OK.
For initial login, the administrator should use the following:
v User name: admin
v Password: secure
Note:
When LDAP is enabled, the login screen gives the user a choice between using
local authentication (the login and password are stored on the library) or LDAP
authentication (the login and password are stored on a server, and the user must
specify the LDAP domain name). If LDAP access is disabled, the LDAP options
will not appear on the login screen.
Chapter 6. User Interfaces
6-3