Ball-Bearing Shuttle In The Middle Rail; If Necessary, Secure The Appliance Handles To - IBM Slicestor 2212 Appliance Manual

Figure 16. Ball-bearing shuttle in the middle rail
4. Align the appliance inner rails with the front of the middle rails.
5. Slide the inner rails on the appliance into the middle rails. Keep the pressure even on both sides until
the locking tab of the inner rail clicks into the front of the middle rail. It locks the appliance into the
fully extended position.
6. Depress the locking tabs of both sides simultaneously and push the appliance completely into the rear
of the rack.
7. If necessary, use screws to secure the appliance handles to the front of the rack, as shown in the
following figure.
Figure 17. If necessary, secure the appliance handles to front of rack with screws
Cable the appliance
1. On the rear panel, connect the power cables. The power connections are at the left of the appliance, as
shown in the following figure.
Chapter 4. Install the appliance into a rack
13