Reducing Weight; Removing A Power Supply; Library Packaging Material Pieces - IBM System Storage TS3310 Setup And Operator Manual

Figure 4-3. Library packaging material pieces
|
|

Reducing Weight

|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|

Removing a Power Supply

|
|
For weight reduction, remove the following components from each unit that must
be moved for installation:
v Power supplies
v Drive sleds
Important: Because of the weight of a multi-module library, it is strongly
recommended that you install it in the lowest position in a rack. Without
18-32 kg (39.7-70.5 lbs)
drive sleds and power supplies, a control module weighs approximately 50
lbs. Without drive sleds and power supplies, each expansion module
weighs approximately 65 lbs.
32-55 kg (70.5-121.2 lbs)
Chapter 4. Installing a New Standalone Library on a Desktop
4-5