Displaying Certificate And Key Information - 3Com WX1200 3CRWX120695A Configuration Manual

426 C 20: M
HAPTER
Displaying
Certificate and Key
Information
K C
ANAGING EYS AND ERTIFICATES
To display information about certificates installed on a WX switch, use
the following commands:
display crypto ca-certificate {admin | eap | web}
display crypto certificate {admin | eap | web}
For example, to display information about an administrative certificate,
type the following command:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# display crypto certificate admin
Certificate:
Version: 3
Serial Number:
Subject: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Signature Algorithm: md5WithRSAEncryption
Issuer: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Validity:
Not Before: Oct 19 01:57:13 2004 GMT
Not After : Oct 19 01:57:13 2005 GMT
The last two rows of the display indicate the period for which the
certificate is valid. Make sure the date and time set on the switch are
within the date and time range of the certificate.
999 (0x3e7)