Configuring Encryption For Mac Clients - 3Com WX1200 3CRWX120695A Configuration Manual

306 C 13: C
HAPTER ONFIGURING
auto-tune max-power: default
Port 6: AP model: mp-252, POE:
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11g, mode:
tx pwr: 1, profile: rp2
auto-tune max-power: default
Port 11: AP model: mp-252, POE: enable, bias: high, name: MP11
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11g, mode: enabled, channel: 6
tx pwr: 1, profile: rp2
auto-tune max-power: default
Radio 2: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default
Configuring
Encryption for MAC
Clients
U E
SER NCRYPTION
enable, bias: high, name: MAP11
enabled, channel: 6
9 Save the configuration. Type the following command:
WX1200# save config
success: configuration saved.
The following example shows how to configure MSS to provide PSK
authentication and TKIP or 40-bit WEP encryption for MAC clients:
1 Create an authentication rule that sends all MAC users of SSID voice to
the local database for authentication and authorization. Type the
following command:
WX1200# set authentication mac ssid voice * local
success: configuration saved.
2 Configure a MAC user group named wpa-for-mac that assigns all MAC
users in the group to VLAN blue. Type the following command:
WX1200# set mac-usergroup wpa-for-mac attr vlan-name blue
success: configuration saved.
3 Add MAC users to MAC user group wpa-for-mac. Type the following commands:
WX1200# set mac-user aa:bb:cc:dd:ee:ff group wpa-for-mac
success: configuration saved.
WX1200# set mac-user a1:b1:c1:d1:e1:f1 group wpa-for-mac
success: configuration saved.