3Com WX1200 3CRWX120695A Configuration Manual page 283

Figure 20 shows the client support when the default encryption settings
are used. A radio using the default encryption settings encrypts traffic for
non-WPA dynamic WEP clients but not for WPA clients or static WEP
clients. The radio disassociates from these other clients.
Figure 20 Default Encryption
User A
Dynamic WEP
Non-WPA
This rest of this chapter describes the encryption types and how to
configure them, and provides configuration scenarios.
WX Switch
MAP
User B
Dynamic 40-bit WEP
WPA
Overview
Encryption settings:
-WPA disabled
-Dynamic WEP enabled
-Static WEP disabled
User C
Static WEP
Non-WPA
283
User D
TKIP
WPA