3Com WX1200 3CRWX120695A Configuration Manual page 84

84 C 5: C
HAPTER ONFIGURING AND
Port Status
===============================================================================
1 Up
...
Port Status
===============================================================================
1 Up
...
M P
ANAGING ORTS AND
Use the keys listed in Table 8 to control the monitor display.
Table 8 Key Controls for Monitor Port Counters Display
Key
Spacebar
Esc
c
To monitor port statistics beginning with octet statistics (the default), type
the following command:
WX1200# monitor port counters
As soon as you press Enter, MSS clears the window and displays statistics
at the top of the window. In this example, the octet statistics are
displayed first.
To cycle the display to the next set of statistics, press the Spacebar. In this
example, packet statistics are displayed next:
Rx Unicast Rx NonUnicast
54620
(For information about the fields in the output, see the
Switch and Controller Command
VLAN
S
Effect on monitor display
Advances to the next statistics type.
Exits the monitor. MSS stops displaying the statistics and
displays a new command prompt.
Clears the statistics counters for the currently displayed
statistics type. The counters begin incrementing again.
Rx Octets
27965420
62144
Reference.)
Tx Octets
34886544
Tx Unicast Tx NonUnicast
68318
Wireless LAN
62556