Summary Of Rogue Detection Features - 3Com WX1200 3CRWX120695A Configuration Manual

Summary of Rogue
Detection Features
Table 48 lists the rogue detection features in MSS.
Table 48 Rogue Detection Features
Rogue
Detection
Feature Description
Classification MSS can classify third-party APs as
rogues or interfering devices. A
rogue is a third-party AP whose
MAC address MSS knows from the
wired side of the network. An
interfering device does not have a
MAC address known on the wired
side.
MSS can detect rogue clients, locate
their APs, and issue countermeasures
against the APs.
Permitted List of OUIs to allow on the network.
vendor list An OUI is the first three octets of a
MAC address and uniquely identifies
an AP's or client's vendor.
Permitted SSID List of SSIDs allowed on the network.
list MSS can issue countermeasures
against third-party APs sending
traffic for an SSID that is not on the
list.
Client black list List of client or AP MAC addresses
that are not allowed on the wireless
network. MSS drops all packets from
these clients or APs.
Attack list List of AP MAC addresses to attack.
MSS can issue countermeasures
against these APs whenever they are
detected on the network.
Ignore list List of MAC addresses to ignore
during RF detection. MSS does not
classify devices on this list as rogues
or interfering devices, and does not
issue countermeasures against them.

Summary of Rogue Detection Features

Applies To
Third-Party
APs
Yes
Yes
Yes
Yes
Yes
Yes
573
Clients
Yes
No
Yes
Yes
No
Yes