3Com WX1200 3CRWX120695A Configuration Manual page 591

Table 50 Rogue Detection Display Commands (continued)
Command
display rfdetect data
display rfdetect visible mac-addr
display rfdetect visible
ap map-num [radio {1 | 2}]
display rfdetect countermeasures
display rfdetect vendor-list
display rfdetect ssid-list
display rfdetect black-list
display rfdetect attack-list
display rfdetect ignore
(For information about the fields in the output, see the
Switch and Controller Command
Displaying RF Detection Information
Description
Displays information about all BSSIDs
detected on the air, and labels those that
are from rogues or interfering devices.
This command is valid on any switch in the
Mobility Domain.
Displays the BSSIDs detected by a specific
3Com radio.
Displays the current status of
countermeasures against rogues in the
Mobility Domain.
This command is valid only on the Mobility
Domain seed.
Displays the list of OUIs that are allowed on
the network. An OUI identifies a piece of
networking equipment's vendor. (See
"Configuring a Permitted Vendor List" on
page 574.)
Displays the list of SSIDs that are allowed on
the network. (See "Configuring a Permitted
SSID List" on page 576.)
Displays the list of wireless clients that are
not allowed on the network. (See
"Configuring a Client Black List" on
page 577.)
Displays the list of wireless devices that you
want MAPs to attack with
countermeasures. (See "Configuring an
Attack List" on page 578.)
Displays the BSSIDs of third-party devices
that MSS ignores during RF detection scans.
(See "Configuring an Ignore List" on
page 579.)
Reference.)
591
Wireless LAN