Virtual Lan Identification; Command-Line Editing; Keyboard Shortcuts - 3Com WX1200 3CRWX120695A Configuration Manual

Virtual LAN
Identification
Command-Line
Editing

Keyboard Shortcuts

The names of virtual LANs (VLANs), which are used in Mobility Domain™
communications, are set by you and can be changed. In contrast, VLAN
ID numbers, which the WX switch uses locally, are determined when the
VLAN is first configured and cannot be changed. Unless otherwise
indicated, you can refer to a VLAN by either its VLAN name or its VLAN
number. CLI set and display commands use a VLAN's name or number
to uniquely identify the VLAN within the WX switch.
MSS editing functions are similar to those of many other network
operating systems.
Table 4 lists the keyboard shortcuts available for entering and editing CLI
commands.
Table 4 CLI Keyboard Shortcuts
Keyboard Shortcut(s)
Ctrl+A
Ctrl+B or Left Arrow key
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F or Right Arrow key
Ctrl+K
Ctrl+L or Ctrl+R
Ctrl+N or Down Arrow
key
Ctrl+P or Up Arrow key
Ctrl+U or Ctrl+X
Ctrl+W
Esc B
Esc D
Delete key or Backspace
key
Function
Jumps to the first character of the command line.
Moves the cursor back one character.
Escapes and terminates prompts and tasks.
Deletes the character at the cursor.
Jumps to the end of the current command line.
Moves the cursor forward one character.
Deletes from the cursor to the end of the command
line.
Repeats the current command line on a new line.
Enters the next command line in the history buffer.
Enters the previous command line in the history buffer.
Deletes characters from the cursor to the beginning of
the command line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes characters from the cursor forward to the end
of the word.
Erases mistake made during command entry. Reenter
the command after using this key.

Command-Line Editing

33