Debug Messages - 3Com WX1200 3CRWX120695A Configuration Manual

WX4400# copy core:netsys.core.217.tar file:netsys.core.217.tar
success: copy complete.
WX4400# dir
===============================================================================
file:
Filename
core:netsys.core.217.tar
file:configuration
file:sysa_bak
Total: 620 Kbytes used, 207202 Kbytes free
===============================================================================
Boot:
Filename
boot0:wx040100.020
*boot1:wx040100.020
Boot0: Total:
Boot1: Total:
===============================================================================
temporary files:
Filename
core:command_audit.cur
core:netsys.core.217.tar
Total: 560 Kbytes used, 91147 Kbytes free

Debug Messages

Capturing System Information and Sending it to Technical Support
If the switch's network interfaces to the TFTP server have gone down,
copy the core file to the nonvolatile file area before restarting the switch.
The following commands copy netsys.core.217.tar to the nonvolatile file
area and verify the result:
9780 Kbytes used, 2460 Kbytes free
9796 Kbytes used, 2464 Kbytes free
In addition to generating a core file, the switch also sends debug
messages to the serial console during a system crash. To capture the
messages, attach a PC to the port (if one is not already attached) and use
the terminal emulation application on the PC to capture a log of the
messages. (For information about connecting to the serial console port,
see the Wireless LAN Switch and Controller Hardware Installation
Size
560 KB May 06 2005, 21:48:33
48 KB Jul 12 2005, 15:02:32
12 KB Mar 15 2005, 19:18:44
Size
9780 KB Aug 23 2005, 15:54:08
9796 KB Aug 28 2005, 21:09:56
Size
37 bytes Aug 28 2005, 21:11:41
560 KB May 06 2005, 21:48:33
647
Created
Created
Created
Guide).