3Com WX1200 3CRWX120695A Configuration Manual page 263

WX# display ap arp 7
AP 7:
Host
-------------------
10.5.4.51
10.5.4.53
(For information about the fields in the output, see the
Switch and Controller Command
To display statistics counters and other information for individual user
sessions, use the display sessions network command. (For information,
see Chapter 25, "Managing Sessions," on page 557.)
Displaying VLAN Profile Information
To display the contents of the VLAN profiles configured on the WX
switch, use the following command:
display vlan-profile [profile-name]
The command lists the names and tags for each VLAN in the VLAN
profile, as well as the MAPs to which the VLAN profile has been applied.
To display the contents of VLAN profile locals type the following
command:
WX# display vlan-profile locals
vlan-profile: locals
Vlan Name Tag
--------- ---
blue none
red 45
ap numbers: 67
(For information about the fields in the output, see the
Switch and Controller Command
Displaying the ARP Table for a MAP
To display the ARP table for a specified MAP, use the following
command:
display ap arp apnumber
The following command displays ARP entries for AP 7:
HW Address
-----------------
00:0b:0e:00:04:0c
00:0b:0e:02:76:f7
Displaying MAP Information
Reference.)
Reference.)
VLAN State
---- --------
1 EXPIRED
1 RESOLVED
263
Wireless LAN
Wireless LAN
Type
-------
DYNAMIC
LOCAL