3Com WX1200 3CRWX120695A Configuration Manual page 248

248 C 10: C
HAPTER ONFIGURING
MAP A P
CCESS OINTS
Table 21 lists the external antenna models you can use with these MAPs.
Table 21 MP-341, MP-352, MP-262 External Antenna Models
Model Type
ANT-5060 802.11a
(ASTN6S)*
ANT-5120 802.11a
(ASTN6T)
ANT-5180 802.11a
(ASTN6H)
ANT1060 802.11b/g
ANT1120 802.11b/g
ANT1180 802.11b/g
Table 22 lists the external antenna models you can use with the MP-620.
Table 22 MP-620 External Antenna Models
Model
ANT-1360-OUT
*
(WA6202-ANT-8G)
ANT-5360-OUT
(WA5201M-ANT-8A-1)
ANT-5060-OUT
(WA5201M-ANT-17A)
ANT-5120-OUT
(WA5201M-ANT-14A)
* The numbers in parentheses are the numbers that appear on the antennas. The numbers
beginning ANT are the part numbers and are the numbers you specify when configuring
the MAP. To verify an external antenna's model number, look for the number in
parentheses.
Specifying the External Antenna Model
To specify the external antenna model, use the following command:
set ap apnumber radio {1 | 2} antennatype
{ANT1060 | ANT1120 | ANT1180 |
ANT5060 | ANT5120 | ANT5180 | ANT7360
ANT-1360-OUT | ANT-5360-OUT | ANT-5060-OUT | ANT-5120-OUT |
ANT-7360-OUT | internal}
Beamwidth
Horizontal
60°
120°
180°
60°
120°
180°
Radio
Type Gain (dBi)
802.11b/g 8
802.11a 8
802.11a 17
802.11a 14
Vertical
14°
14°
14°
65°
60°
40°
Beamwidth
Horizontal Vertical
360° 15°
360° 12°
60° 6°
120° 6°