Restoring Access To A Locked-Out User; Displaying Password Information - 3Com WX1200 3CRWX120695A Configuration Manual

70 C 4: M U P
HAPTER ANAGING SER ASSWORDS
Restoring Access to a If a user's password has expired, or the user is unable to log in within the
configured limit for login attempts, then the user is locked out of the
Locked-Out User
system, and cannot gain access without the intervention of an
administrator.
To restore access to a user who had been locked out of the system, use
the following command:
clear user username lockout
If a user has been locked out of the system because of an expired
password, you must first assign the user a new password before you can
restore access to the user.
The following command restores access to user Nin, who had previously
been locked out of the system:
WX# clear user Nin lockout
success: change accepted.
Displaying Password User password information can be displayed with the display aaa
Information command. For example:
WX# display aaa
...
...
set authentication password-restrict enable
set authentication minimum-password-length 10
...
user bob
Password = 00121a08015e1f (encrypted)
Password-expires-in = 59 hours (2 days 11 hours)
status = disabled
vlan-name = default
service-type = 7
(For details on displaying passwords, see the Wireless LAN Switch and
Controller Command Reference.