Copying A File - 3Com WX1200 3CRWX120695A Configuration Manual

604 C 27: M
HAPTER ANAGING
WX1200# dir core:
===============================================================================
file:
Filename
core:command_audit.cur
Total:
WX1200# dir boot0:
===============================================================================
file:
Filename
boot0:WXA30001.Rel
Total:

Copying a File

S F
YSTEM ILES
The following command limits the output to the contents of the
/tmp/core subdirectory:
37 bytes used, 91707 Kbytes free
The following command limits the output to the contents of the boot0
partition:
9780 Kbytes used, 207663 Kbytes free
(For information about the fields in the output, see the
Switch and Controller Command
You can perform the following copy operations:
Copy a file from a TFTP server to nonvolatile storage.
Copy a file from nonvolatile storage or temporary storage to a TFTP
server.
Copy a file from one area in nonvolatile storage to another.
Copy a file to a new filename in nonvolatile storage.
To copy a file, use the following command.
copy source-url destination-url
A URL can be one of the following:
[subdirname/]filename
file:[subdirname/]filename
tftp://ip-addr/[subdirname/]filename
tmp:filename
The filename and file:filename URLs are equivalent. You can use either
URL to refer to a file in a WX switch's nonvolatile memory.
Size
37 bytes Aug 28 2005, 21:11:41
Size
9780 KB Aug 23 2005, 15:54:08
Reference.)
Created
Created
Wireless LAN