3Com WX1200 3CRWX120695A Configuration Manual page 405

Configuring a Service Profile for RSN (WPA2)
To configure a service profile for SVP phones that use RSN (WPA2):
Create the service profile and add the voice SSID to it.
Enable the RSN information element (IE).
Disable TKIP and enable CCMP.
Disable 802.1X authentication and enable preshared key (PSK)
authentication instead.
Enter the PSK key.
Set the service profile's VLAN attribute to the name of the VLAN you
create for the voice clients.
The following commands configure a service profile called vowlan-wpa2
for RSN:
WX4400# set service-profile vowlan-wpa2 ssid-name phones
WX4400# set service-profile vowlan-wpa2 rsn-ie enable
WX4400# set service-profile vowlan-wpa2 cipher-tkip disable
WX4400# set service-profile vowlan-wpa2 cipher-ccmp enable
WX4400# set service-profile vowlan-wpa2 auth-dot1x disable
WX4400# set service-profile vowlan-wpa2 auth-psk enable
WX4400# set service-profile vowlan-wpa2 psk-raw
c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b879
65e59d
WX4400# set service-profile vowlan-wpa2 attr vlan-name v1
Configuring a Service Profile for WPA
To configure a service profile for SVP phones that use WPA:
Create the service profile and add the voice SSID to it.
Enable the WPA information element (IE). This also enables TKIP. Leave
TKIP enabled.
Disable 802.1X authentication and enable preshared key (PSK)
authentication instead.
Enter the PSK key.
Set the service profile's VLAN attribute to the name of the VLAN you
create for the voice clients.
Enabling Prioritization for Legacy Voice over IP 405