Configuring Mac Authentication And Authorization - 3Com WX1200 3CRWX120695A Configuration Manual

Configuring Authentication and Authorization by MAC Address 457
For example, type the following command to add MAC user
01:0f:03:04:05:06 to group macfans:
WX1200# set mac-user 01:0f:03:04:05:06 group macfans
success: change accepted.
Clearing MAC Users and Groups
To clear a MAC user from a user group, use the following command:
clear mac-user mac-addr group
For example, the following command removes MAC user
01:0f:03:04:05:06 from group macfans:
WX1200# clear mac-user 01:0f:03:04:05:06 group
success: change accepted.
The clear mac-usergroup command removes the group.
To remove a MAC user profile from the local database on the WX switch,
type the following command:
clear mac-user mac-address
For example, the following command removes MAC user
01:0f:03:04:05:06 from the local database:
WX1200# clear mac-user 01:0f:03:04:05:06
success: change accepted.
Configuring MAC The set authentication mac command defines the AAA methods by
Authentication and which MAC addresses can be used for authentication. You can configure
Authorization authentication for users through the MAC addresses of their devices with
the following command:
set authentication mac {ssid ssid-name | wired} mac-addr-glob
method1 [method2] [method3] [method4]
MAC addresses can be authenticated by either the WX local database or
by a RADIUS server group. For example, the following command sets the
authentication for MAC address 01:01:02:03:04:05 when requesting
SSID voice, via the local database:
WX1200# set authentication mac ssid voice
01:01:02:03:04:05 local
success: change accepted