Displaying 802.1X Information; Viewing 802.1X Clients; Viewing The 802.1X Configuration - 3Com WX1200 3CRWX120695A Configuration Manual

540 C 23: M
HAPTER
Displaying 802.1X
Information
Viewing 802.1X
Clients
WX1200# display dot1x clients
MAC Address
-------------
00:20:a6:48:01:1f
00:05:3c:07:6d:7c
00:05:5d:7e:94:83
00:02:2d:86:bd:38
00:05:5d:7e:97:b4
00:05:5d:7e:98:1a
00:0b:be:a9:dc:4e
00:05:5d:7e:96:e3
00:02:2d:6f:44:77
00:05:5d:7e:94:89
00:06:80:00:5c:02
00:02:2d:6a:de:f2
00:02:2d:5e:5b:76
00:02:2d:80:b6:e1
00:30:65:16:8d:69
00:02:2d:64:8e:1b
Viewing the 802.1X
Configuration
802.1X
ANAGING ON THE
This command displays 802.1X information for clients, statistics, VLANs,
and configuration.
display dot1x {clients | stats | config}
display dot1x clients displays the username, MAC address, VLAN,
and state of active 802.1X clients.
display dot1x config displays a summary of the current
configuration.
display dot1x stats displays global 802.1X statistical information
associated with connecting and authenticating.
Type the following command to display active 802.1X clients:
State
-------
Connecting
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Type the following command to display the 802.1X configuration:
WX1200# display dot1x config
802.1X user policy
----------------------
'EXAMPLE\pc1' on ssid 'mycorp' doing EAP-PEAP (EAP-MSCHAPv2)
'EXAMPLE\bob' on ssid 'mycorp' doing EAP-PEAP (EAP-MSCHAPv2)
(bonded)
WX S
WITCH
Vlan
------
(unknown)
vlan-it
vlan-eng
vlan-eng
vlan-eng
vlan-eng
vlan-pm
vlan-eng
vlan-eng
vlan-eng
vlan-eng
vlan-pm
vlan-pm
vlan-cs
vlan-wep
vlan-eng
Identity
----------
EXAMPLE\smith
EXAMPLE\jgarcia
wong@exmpl.com
EXAMPLE\hosni
EXAMPLE\tsmith
havel@corp.com
EXAMPLE\geetha
EXAMPLE\tamara
EXAMPLE\nwong
EXAMPLE\hhabib
smith@exmpl.com
EXAMPLE\natasha
jjg@exmpl.com
MAC authenticated
EXAMPLE\jose