3Com WX1200 3CRWX120695A Configuration Manual page 654

654 C C: S
HAPTER UPPORTED
RADIUS A
TTRIBUTES
Table 55 801.1X Attributes (continued)
Attribute Type
Filter-Id 11
Rcv in Sent in Sent in
Access Access Acct
Resp? Reqst? Reqst?
Yes No Optional If configured in the WX
Description
switch's local database,
this attribute can be an
access control list (ACL) to
filter outbound or inbound
traffic. Use the following
format:
filter-id inboundacl.in
or
filter-id outboundacl.out
If you are configuring the
attribute on a RADIUS
server, the value field of
filter-id can specify up to
two ACLs. Any of the
following are valid:
filter-id =
"Profile=acl1"
filter-id =
"OutboundACL=acl2"
filter-id = "Profile=acl1
OutboundACL=acl2"
(Each example goes on a
single line on the server.)
The format in which to
specify the values depends
on the RADIUS server.
Regardless of whether the
attributes are defined
locally or on a RADIUS
server, the ACLs must
already be configured on
the WX switch.
(For details, see
Chapter 19, "Configuring
and Managing Security
ACLs," on page 377.)