Displaying Vlan Information - 3Com WX1200 3CRWX120695A Configuration Manual

Displaying VLAN
Information
WX1200# display vlan config burgundy
VLAN Name
---- ---------------- ------ ----- ----- ---------------- ----- -----
2 burgundy
4094 web-aaa
The following commands restrict Layer 2 forwarding of client data in
VLAN abc_air to the default routers with MAC address aa:bb:cc:dd:ee:ff
and 11:22:33:44:55:66, and display restriction information and statistics:
WX1200# set security l2-restrict vlan abc_air mode enable
permit-mac aa:bb:cc:dd:ee:ff 11:22:33:44:55:66
success: change accepted.
WX1200# display security l2-restrict
VLAN Name
---- ----------- -- ---------- ------------------- ----------
1 abc_air Y
The En field indicates whether restriction is enabled. The Drops field
indicates how many packets were addressed directly from one client to
another and dropped by MSS. The Hits field indicates how many packets
the permitted default router has received from clients.
To reset the statistics counters, use the following command:
clear security l2-restrict counters [vlan vlan-id | all]
To display VLAN configuration information, use the following command:
display vlan config [vlan-id]
To display information for VLAN burgundy, type the following command:
Admin VLAN Tunl
Status State Affin Port
Up Up
Up Up
The display can include MAP access ports and wired authentication ports,
because MSS dynamically adds these ports to a VLAN when handling user
traffic for the VLAN.
(For information about the fields in the output, see the
Switch and Controller Command
Configuring and Managing VLANs
En Drops Permit MAC
0 aa:bb:cc:dd:ee:ff
11:22:33:44:55:66
5
2
3
4
6
0
2
Reference.)
Hits
5947
9
Port
Tag State
none Up
none Up
none Up
none Up
4094 Up
Wireless LAN
95