3Com WX1200 3CRWX120695A Configuration Manual page 47

CLI quickstart Command 47
If you configure time and date parameters, you will be required to enter a
name for the timezone, and then enter the value of the timezone (the
offset from UTC) separately. You can use a string of up to 32 alphabetic
characters as the timezone name.
Figure 2 shows an example. Users bob and alice can access encrypted
SSID corporate on either of the MAPs. Users user1 and user2 can use the
same MAPs to access unencrypted SSID public. Although the same
hardware supports both SSIDs and sets of users, AAA ensures that only
the users who are authorized to access an SSID can access that SSID.
Users of separate SSIDs can even be in the same VLAN, as they are in this
example.
Figure 2 Single-Switch Deployment
WX1200-20-Corp
Backbone
Internet
10.10.10.4
Console
Port Port
2
3
Corporate resources
alice bob
user2
user1
WXR100-aabbcc# quickstart
This will erase any existing config. Continue? [n]: y
Answer the following questions. Enter '?' for help. ^C to
break out
System Name [WXR100]: WXR100-mrktg
Country Code [US]: US
System IP address []: 172.16.0.21
System IP address netmask []: 255.255.255.0
Default route []: 172.16.0.21
Do you need to use 802.1Q tagged default VLAN [Y/N]? Y: y
Specify the port number that needs to be tagged [1-2, <CR>
ends config]: 2
Specify the tagged value for port [2] [<CR> ends config:] 100