3Com WX1200 3CRWX120695A Configuration Manual page 204

204 C 10: C
HAPTER ONFIGURING
MAP A P
CCESS OINTS
Table 10 Defaults for Service Profile Parameters (continued)
Parameter
keep-initial-vlan
no-broadcast
proxy-arp
psk-phrase
psk-raw
rsn-ie
shared-key-auth
short-retry-count
soda
ssid-name
ssid-type
static-cos
Radio Behavior When Parameter
Default Value Set to Default Value
disable Reassigns the user to a VLAN after
roaming, instead of leaving the roamed
user on the VLAN assigned by the
switch where the user logged on.
Note: Enabling this option does not
retain the user's initial VLAN
assignment in all cases.
disable Does not reduce wireless broadcast
traffic by sending unicasts to clients for
ARP requests and DHCP Offers and
Acks instead of forwarding them as
multicasts.
disable Does not reply on behalf of wireless
clients to ARP requests for client IP
addresses. Instead, the radio forwards
the ARP Requests as wireless
broadcasts.
No passphrase Uses dynamically generated keys rather
defined than statically configured keys to
authenticate WPA clients.
No preshared Uses dynamically generated keys rather
key defined than statically configured keys to
authenticate WPA clients.
disable Does not use the RSN IE in transmitted
frames.
disable Does not use shared-key
authentication.
This parameter does not enable PSK
authentication for WPA. To enable PSK
encryption for WPA, use the
set radio-profile auth-psk command.
5 Sends a short unicast frame up to five
times without acknowledgment.
disable Sygate On Demand Agent (SODA) files
are not downloaded to connecting
clients.
3Com Uses the SSID name 3Com.
crypto Encrypts wireless traffic for the SSID.
disable Assigns CoS based on the QoS mode
(wmm or svp) or based on ACLs.