Displaying The Forwarding Database For A Map; Displaying Vlan Information For A Map - 3Com WX1200 3CRWX120695A Configuration Manual

264 C 10: C
HAPTER ONFIGURING
Displaying the
Forwarding Database
for a MAP
Displaying VLAN
Information for a
MAP
MAP A P
CCESS OINTS
(For information about the fields in the output, see the
Switch and Controller Command
To display the entries in a specified MAP forwarding database, use the
following command:
display ap fdb apnumber
The following command displays FDB entries for AP 7:
WX# display ap fdb 7
AP 7:
# = System Entry. $ = Authenticate Entry
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports
---- ---- ------------------ ----- -----------------
4095 4095 00:0b:0e:00:ca:c1
4095 0 00:0b:0e:00:04:0c
(For information about the fields in the output, see the
Switch and Controller Command
To display information about the VLANs that are either locally switched
by the specified MAP or tunneled from the MAP to a WX switch, use
the following command:
display ap vlan apnumber
The command lists the VLANs to which the clients associated with the
MAP are members, and whether traffic for each VLAN is locally switched
or tunneled back to a WX switch.
The following command displays information about the VLANs switched
by AP 7:
WX# display ap vlan 7
AP 7:
VLAN Name
---- ---------------- ----- ----------------
1 default
2 red local 1 2
Reference.)
#
Reference.)
Mode
local
radio_1
radio_1
radio_2
Wireless LAN
CPU
eth0
Wireless LAN
Port Tag
----
1 none
20
21
22