Displaying Ssid Or Bssid Information For A Mobility Domain - 3Com WX1200 3CRWX120695A Configuration Manual

594 C 26: R
HAPTER OGUE
Access points not present in ssid-list
Access points not present in vendor-list
Clients not present in vendor-list
Clients added to automatic black-list
Displaying SSID or
BSSID Information for
a Mobility Domain
WX1200# display rfdetect mobility-domain
Total number of entries: 194
Flags: i = infrastructure, a = ad-hoc, u = unresolved
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID
----------------- ------------ ----- ------ --------------------------------
00:07:50:d5:cc:91
00:07:50:d5:dc:78
00:09:b7:7b:8a:54
00:0a:5e:4b:4a:c0
00:0a:5e:4b:4a:c2
00:0a:5e:4b:4a:c4
00:0a:5e:4b:4a:c6
00:0a:5e:4b:4a:c8
00:0a:5e:4b:4a:ca
WX1200# display rfdetect mobility-domain ssid 3Com-webaaa
BSSID: 00:0a:5e:4b:4a:ca Vendor: 3Com SSID: 3Com-webaaa
Type: intfr Adhoc: no Crypto-types: clear
D C
ETECTION AND OUNTERMEASURES
MSS generates log messages for most of these statistics. See "IDS and
DoS Alerts" on page 584.
To display SSID or BSSID information for an entire Mobility Domain, use
the following command on the seed switch:
display rfdetect mobility-domain [ssid ssid-name | bssid
mac-addr]
The following command displays summary information for all SSIDs and
BSSIDs detected in the Mobility Domain:
Vendor Type
Cisco intfr i----w r27-cisco1200-2
Cisco intfr i----w r116-cisco1200-2
Cisco intfr i-----
3Com intfr i----- public
3Com intfr i----w 3Comwlan
3Com intfr ic---- 3Com-ccmp
3Com intfr i----w 3Com-tkip
3Com intfr i----w 3Com-voip
3Com intfr i----- 3Com-webaaa
...
The lines in this display are compiled from data from multiple listeners
(MAP radios). If an item has the value unresolved, not all listeners agree
on the value for that item. Generally, an unresolved state occurs only
when a MAP or a Mobility Domain is still coming up, and lasts only
briefly.
The following command displays detailed information for rogues using
SSID 3Com-webaaa.
Flags SSID
0 0
0 0
0 0
0 0