Displaying Network Domain Information - 3Com WX1200 3CRWX120695A Configuration Manual

172 C 9: C
HAPTER ONFIGURING
Displaying Network
Domain Information
N D
ETWORK OMAINS
To specify 10.8.107.1 as an additional Network Domain seed for the WX
switch to connect to if the 192.168.9.254 seed is unavailable, enter the
following command:
WX1200# set network-domain mode member seed-ip 10.8.107.1
affinity 2
success: change accepted.
To view the status of Network Domains configured on the WX switch, use
the display network-domain command. The output of the command
differs based on whether the WX switch is a member of a Network
Domain or a Network Domain seed.
For example, a WXswitch that is a Network Domain member only, output
such as the following is displayed:
WX4400# display network-domain
Member Network Domain name: California
Member
---------------
10.67.1.201
10.67.1.200
On a WX switch that is a Network Domain seed, information is displayed
about the Network Domain seeds with which the WX switch has a peer
relationship, as well as the Network Domains of which the WX switch is a
member. For example:
WX4400# display network-domain
Network Domain name: California
Peer
---------------
10.67.1.200
Member
---------------
10.67.1.201
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command
State
-------------
UP
UP
State
-------------
UP
State
-------------
UP
Mode
------
MEMBER
SEED
Mode
------
MEMBER
Reference.)