3Com WX1200 3CRWX120695A Configuration Manual page 389

WX1200# display security acl info acl-2
ACL information for acl-2
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits
You can also view a specific security ACL. For example, to view acl-2, type
the following command:
Displaying Security ACL Hits
Once you map an ACL, you can view the number of packets it has
filtered, if you included the keyword hits. (For information on setting hits,
see "Setting a Source IP ACL" on page 380.) Type the following
command:
WX1200# display security acl hits
ACL hit-counters
Index Counter
----- -------------------- --------
1
2
5
To sample the number of hits the security ACLs generate, you must
specify the number of seconds between samples. For example, to sample
the hits generated every 180 seconds, type the following commands:
WX1200# set security acl hit-sample-rate 180
WX1200# display security acl hits
ACL hit-counters
Index Counter
----- -------------------- --------
1
2
To display the security ACL hits on MAP 7, type the following command:
WX# display ap acl hits 7
ACL hit-counters for AP 7
Index Counter
----- -------------------- --------
1
2
3
Creating and Committing a Security ACL
ACL-name
0 acl-2
0 acl-999
916 acl-123
ACL-name
31986 acl-red
0 acl-green
ACL-name
0 acl_2
0 acl_175
916 acl_123
389