Displaying Roaming Vlans And Their Affinities; Displaying Tunnel Information - 3Com WX1200 3CRWX120695A Configuration Manual

160 C 8: C
HAPTER ONFIGURING AND
Displaying Roaming
VLANs and Their
Affinities
Displaying Tunnel
Information
WX1200# display tunnel
VLAN
---------------- --------------- --------------- ------- ----- ----
vlan-eng
vlan-eng
vlan-pm
M M
ANAGING OBILITY
The command display roaming vlan displays all VLANs in the Mobility
Domain, the WX switches servicing the VLANs, and their tunnel affinity
values configured on each switch for the VLANs.
The member WX switch that offers the requested VLAN reports the
affinity number. If multiple WX switches have native attachments to the
VLAN, the affinity values they advertise are a way to attract tunneled
traffic to a particular WX switch for that VLAN. A higher value represents
preferred connection to the VLAN. (For more information, see "Changing
Tunneling Affinity" on page 93.)
To display roaming VLANs, type the following command:
WX1200# display roaming vlan
VLAN
---------------- --------------- --------
vlan-eng
vlan-fin
vlan-pm
vlan-wep
vlan-wep
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command
The command display tunnel displays the tunnels that the WX switch is
hosting to distribute to a locally attached VLAN. To display tunnel
information, type the following command:
Local Address Remote Address
192.168.12.7 192.168.15.5
192.168.12.7 192.168.14.6
192.168.12.7 192.168.15.5
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command
D R
OMAIN OAMING
WX
192.168.12.7
192.168.15.5
192.168.15.5
192.168.12.7
192.168.15.5
State
UP
DORMANT
UP
Affinity
5
5
5
5
5
Reference.)
Port LVID RVID
---
1024 130
1026 130
1024 4096
Reference.)
4103
4097
160