Displaying Wlan Mesh Services Information - 3Com WX1200 3CRWX120695A Configuration Manual

Displaying WLAN
Mesh Services
Information
WX# display ap status terse
Total number of entries: 120
Operational: 1, Image Downloading: 0, Unknown: 119, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto AP, m = mesh AP, p = mesh portal
i = insecure, e = encrypted, u = unencrypt
AP Flag IP Address
--- ---- ---------------
7 om-u MP-422
WX# display ap status
AP: 1, IP-addr: 10.8.255.10 (vlan 'corp'), AP model: mp-422,
manufacturer: 3Com, name: AP01
====================================================
State: operational (not encrypt)
CPU info: Atheros:MIPS32 speed=220000000 Hz version=AR5312, ram=16777216
Uptime: 0 hours, 0 minutes, 11 seconds
Uplink BSSID: 00:0b:0e:17:bb:00
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 6 (Auto) operational power: 18
bssid1: 00:0b:0e:fd:fd:cc, ssid: public
RFID Reports: Inactive
Antenna Link Calibration: Enabled
When wireless bridging is enabled for a service profile, the MAPs with the
applied service profile serve as bridge peers. When a Mesh AP associates
with a Mesh Portal AP through this service profile, the Mesh Portal AP
automatically configures the Mesh AP to operate in bridge mode.
The display service-profile command indicates whether bridging has
been enabled for the service profile.
The display ap status terse command indicates which MAPs are Mesh
APs and which are Mesh Portal MAPs. For example:
Model
--------- ----------------- ------ ------ ------
The display ap status command displays the mesh services attributes for
a MAP and the associated BSSID of the Mesh Portal. For example:
s/n=111111 hw_rev=n/a

Displaying WLAN Mesh Services Information

MAC Address
00:0b:0e:00:ca:c0 D 1/1
Radio1 Radio2 Uptime
D56/1 19h47m
279